Utilization of Pili (Canarium ovatum) sawdust in bio-crude oil production and the identification of potential by-products through thermochemical conversion

Jerico Prado; English English; English English; English English

doi:10.29303/aca.v7i2.188

Utilization of Pili (Canarium ovatum) sawdust in bio-crude oil production and the identification of potential by-products through thermochemical conversion

Penulis

Jerico Prado , English , English , English English

DOI:

10.29303/aca.v7i2.188

Diterbitkan:

2024-10-31

Terbitan:

Vol 7 No 2 (2024)

Kata Kunci:

Viscosity, Distillate, Thermochemical Conversion, Pyrolysis Method, By-product, Flammability and Combustibility, standardization

Articles

Unduhan

PDF (English)

Cara Mengutip

Prado, J., English, J. C. ., English, F., & English, D. (2024). Utilization of Pili (Canarium ovatum) sawdust in bio-crude oil production and the identification of potential by-products through thermochemical conversion. Acta Chimica Asiana, 7(2), 464–470. https://doi.org/10.29303/aca.v7i2.188

Unduh Sitasi

Unduhan

Data unduhan belum tersedia.

Metrik

Metrik sedang dimuat ...

Abstrak

This study aimed to utilize Pili sawdust in the production of bio-crude oil and identify its potential by-products through thermochemical conversion. To obtain all the essential data, this research sought to answer the questions: (1) How much bio-crude oil can be produced at constant factors such as temperature and amount of Pili (Canarium ovatum) sawdust? (2) What are the physical characteristics of the generated bio-crude oil after conducting thermochemical conversion? (a) Color, (b) Appearance, and (c) Viscosity (3) What other potential by-product can be generated out of Pili (Canarium ovatum) sawdust after conducting thermochemical conversion. (4) What are the physical characteristics of the generated by-products after conducting thermochemical conversion? (a) Color and (b) Appearance. Experimental-descriptive method was used in perceiving the physical properties of the by-products and its bio-crude oil production, presented in milliliters (mL) and to be expressed in percentage respectively. Based on the gathered observation record results, data revealed that 1000 g of Pili sawdust in 340 ^oC temperature, yields 30% or 300mL of brownish bio-crude oil in color, with a high degree of viscosity. Consequently, the generated by-products are biochar and synthesized biogas. The 242.2g of biochar which yields 24.52%, resulted being porous and coarse-grained in texture. While the synthesized biogas generated 433.4g of net weight yields 43.34%, resulted in having a high flammability. For the betterment of similar study, future researchers are encouraged to evaluate the agricultural potential of the generated biochar and to distillate bio-crude oil for possible commercial use.

Referensi

Hubbard, W. G. (2020). Wood bioenergy. In Bioenergy (pp. 69-87). https://doi.org/10.1016/B978-0-12-815497-7.00004-X

Duanguppama, K., Pattiya, A., & Suwapaet, N. (2016). Fast pyrolysis of contaminated sawdust in a circulating fluidised bed reactor. Journal of Analytical and Applied Pyrolysis, 118, 63–74. https://doi.org/10.1016/j.jaap.2015.12.025

Mondal, P., & Varma, A.K. (2016). Physicochemical characterization and pyrolysis kinetics of wood sawdust. Energy Sources, Part A: Recovery, Utilization, and Environmental Effects, 38(17), 2536–2544. https://doi.org/10.1080/15567036.2015.1072604

Fardhyanti, D. S., Kurniawan, C., Lestari, R. A. S., Megawati, K., Kurniawan, C., & Triwibowo, B. (2018). Producing bio-oil from coconut shell by fast pyrolysis processing. MATEC Web of Conferences, 237, 02001. https://doi.org/10.1051/matecconf/201823702001

Korb, K. (2013). Calculating descriptive statistics. Korbedpsych.com. http://korbedpsych.com/R17bDescr

Cooper, D. G., McCaffrey, W. C., & Kamal, M. R. (1995). Thermolysis of polyethylene. Polymer Degradation and Stability, 46, 133–139. https://doi.org/10.1016/0141-3910(94)00096-Q

Wrethborn, T. (2016). Pyrolysis of wood chips: Influence of pyrolysis conditions on charcoal yield and charcoal reactivity. Luleå University of Technology Department of Engineering Sciences and Mathematics. http://ltu.diva-portal.org/smash/get/diva2:972188/FULLTEXT01.pdf

Aworabhi, E., Banigo, B. O., Lasebikan, O. L., Odogwu, J. O., Ogunwole, O. B., & Okechukwu, N. O. (2021). Analyzing the elemental chemical composition and inorganic minerals of woody biomass for alternative energy generation: A viewpoint of Nigerian sawdust. International Journal of Science and Engineering Investigations (IJSEI), 10(117), 17–20. http://www.ijsei.com/papers/ijsei-1011721-03.pdf

Guida, M. Y., Laghchioua, F. E., Lanaya, S., & Rbihi, Z. (2020). Production of bio-oil and biochar from pyrolysis of sawdust wood waste (SWW). Research Gate, 16(1), 61–80. https://doi.org/10.1556/446.2020.00012

Ben, H., Wu, F., Wu, Z., Han, G., Jiang, W., & Ragauskas, A. (2019). A comprehensive characterization of pyrolysis oil from softwood barks. Polymers, 11(9), 1387. https://doi.org/10.3390/polym11091387

Dimin, M. F., Husin, M., Juoi, J. M., Mitan, N. M., Se, S. M., & Shaaban, A. (2014). Influence of heating temperature and holding time on biochars derived from rubber wood sawdust via slow pyrolysis. Journal of Analytical and Applied Pyrolysis, 107, 31–39. https://doi.org/10.1016/j.jaap.2014.01.021

Charvet, F., Figueiredo da Silva, J., Matos, A., Neves, D., Ruivo, L., Silva, F., & Tarelho, L. (2021). Pyrolysis characteristics of undervalued wood varieties in the Portuguese charcoal sector. Energies, 14(9), 2537. https://doi.org/10.3390/en14092537

Yildiz, D., & Yorgun, S. (2015). Slow pyrolysis of paulownia wood: Effects of pyrolysis parameters on product yields and bio-oil characterization. Journal of Analytical and Applied Pyrolysis, 114, 68–78. https://doi.org/10.1016/j.jaap.2015.05.003

Hu, X., Li, W., Shi, Y., & Xu, Y. (2011). Preparation and characterization of bio-oil from biomass. In (Ed.), Progress in Biomass and Bioenergy Production. IntechOpen. https://doi.org/10.5772/16466

Lu, J., Wang, J., Wang, S., Wu, Y., & Yang, M. (2022). Improved bio-oil quality from pyrolysis of pine biomass in pressurized hydrogen. Applied Sciences, 12(1), 46. https://doi.org/10.3390/app12010046

Zhu, L., Lei, H., Zhang, Y., Bu, Q., Wei, Y., Wang, L., Yadavalli, G., & Villota, E. (2018). A review of biochar derived from pyrolysis and its application in biofuel production. SF Journal of Material and Chemical Engineering. https://www.researchgate.net/publication/325923165_A_Review_of_Biochar_Derived_from_Pyrolysis_and_Its_Application_in_Biofuel_Production

Nahil, M. A., Waheed, Q. M. K., & Williams, P. T. (2016). Pyrolysis of waste biomass: Investigation of fast pyrolysis and slow pyrolysis process conditions on product yield and gas composition. Journal of the Energy Institute, 86(4), 233–241. https://doi.org/10.1179/1743967113Z.00000000067

Chen, G., Chen, L., Chen, X., Chen, Y., Hay, A. G., Lehmann, J., & McBride, M. B. (2011). Adsorption of copper and zinc by biochars produced from pyrolysis of hardwood and corn straw in aqueous solution. Bioresource Technology, 102(19), 8877–8884. https://doi.org/10.1016/j.biortech.2011.06.078

Uzun, B. B., Pütün, A. E., & Pütün, E. (2006). Composition of products obtained via fast pyrolysis of olive-oil residue: Effect of pyrolysis temperature. Journal of Analytical and Applied Pyrolysis, 79(1–2), 147–153. https://doi.org/10.1016/j.jaap.2006.12.001

Selvarajoo, A., Wong, Y. L., Khoo, S. K., Chen, W. H., & Show, P. L. (2022). Biochar production via pyrolysis of citrus peel fruit waste as a potential usage as solid biofuel. Chemosphere, 133671. https://doi.org/10.1016/j.chemosphere.2022.133671

Carvalho, D., Chavez, J., Gomes, N. G., & Medeiros, D. (2017). Methodology for burner design: Combustion of pyrolysis gas from charcoal production. COBEM 2017. http://dx.doi.org/10.26678/ABCM.COBEM2017.COB171422

Lisensi

Artikel ini berlisensiCreative Commons Attribution-NonCommercial-ShareAlike 4.0 International License.

Authors who publish with ACA: Acta Chimica Asiana agree to the following terms:

Authors retain copyright and grant the journal right of first publication with the work simultaneously licensed under a Creative Commons Attribution-NonCommercial-ShareAlike 4.0 International License. This license allows authors to use all articles, data sets, graphics, and appendices in data mining applications, search engines, web sites, blogs, and other platforms by providing an appropriate reference. The journal allows the author(s) to hold the copyright without restrictions and will retain publishing rights without restrictions.
Authors are able to enter into separate, additional contractual arrangements for the non-exclusive distribution of the journal's published version of the work (e.g., post it to an institutional repository or publish it in a book), with an acknowledgement of its initial publication in ACA: Acta Chimica Asiana.
Authors are permitted and encouraged to post their work online (e.g., in institutional repositories or on their website) prior to and during the submission process, as it can lead to productive exchanges, as well as earlier and greater citation of published work (See The Effect of Open Access).

Utilization of Pili (Canarium ovatum) sawdust in bio-crude oil production and the identification of potential by-products through thermochemical conversion

Penulis

DOI:

Diterbitkan:

Terbitan:

Kata Kunci:

Articles

Unduhan

Cara Mengutip

Unduhan

Metrik

Abstrak

Referensi

Lisensi

Authors who publish with ACA: Acta Chimica Asiana agree to the following terms:

menu

Manuscript Template

Bahasa

Visitor

Terbitan Terkini

Journal Publisher

Contact Us

Information

Share & Follow